Cat No. IS.146 |
Description |
Units |
102.212 |
Cortical Screw 3.5mm Dia. – Self Tapping – Length 12mm – S.S. |
5 Each |
102.214 to 102.226 |
Length 14, 16, 18, 20, 22, 24, 26mm |
10 Each |
102.228 to 102.260 |
Length 28, 30, 32, 34, 36, 38, 40, 45, 50, 55, 60mm |
5 Each |
|
3.5mm Locking Head Screw- Self Tapping – S.S. |
|
102.310 to 102.314 |
Length 10,12 & 14mm |
5 Each |
102.316 to 102.318 |
Length 16,18 & 20mm |
10 Each |
102.322 to 102.380 |
Length 22, 24, 26, 28, 30, 32, 34, 36, 38, 40, 45, 50, 55, 60, 65, 70, 75, 80mm |
5 Each |
|
4.0mm Locking Head Cancellous Screw Full Thread – Self Tapping – S.S. |
|
105.514 to 105.530 |
Length 14, 16, 18, 20, 22, 24, 26, 28, 30mm |
5 Each |
105.532 |
Length 32mm |
10 Each |
105.534 to 105.580 |
Length 34, 36, 38, 40, 42, 44, 46, 48, 50, 55, 60, 65, 70, 75, 80mm |
5 Each |
|
2.7mm Locking Head Screw – Self Tapping – (Hex 2.0mm) – S.S. |
|
101.310 to 101.314 |
Length- 10, 12, 14mm |
4 Each |
101.316 to 101.320 |
Length- 16, 18, 20mm |
8 Each |
101.322 to 101.340 |
Length- 22, 24, 26, 28, 30, 32, 34, 36, 38, 40mm |
4 Each |
|
Cortical Screw 2.7mm Dia. – Self Tapping – S.S. |
|
101.110 to 101.114 |
Length- 10, 12, 14mm |
3 Each |
110.116 to 101.120 |
Length- 16, 18, 20mm |
6 Each |
110.122 to 110.140 |
Length- 22, 24, 26, 28, 30, 32, 34, 36, 38, 40mm |
3 Each |
|
Cancellous Screw 4.0mm Dia. Short – Thread – S.S. |
|
104.018 to 104.060 |
Length- 18, 20, 22, 24, 26, 28, 30, 35, 40, 45, 50, 55, 60mm |
3 Each |
|
Cancellous Screw 4.0mm Dia. Full – Thread – S.S. |
|
105.018 to 105.060 |
Length- 18, 20, 22, 24, 26, 28, 30, 35, 40, 45, 50, 55, 60mm |
3 Each |
804.163 |
Q.C. Torque Screw Driver Handle 2.5mm Tip (Torque 1.5Nm) |
1 |
804.168 |
Hexagonal Screw Driver Q.C. End Shaft, 2.5mm Tip (for Torque Handle 1.5Nm) |
1 |
301.040 |
Small Hexagonal Screw Driver 2.5mm Tip – Silicon Handle |
1 |
303.010 |
Small Depth Gauge |
1 |
260.281 |
Drill Bit S.S. Quick Coupling End Dia. 2.8mm X 180mm Long – Calibrated |
1 |
260.250 |
Drill Bit – S.S. – Quick Coupling End Dia. 2.5mm X 115mm Long |
1 |
804.121 |
Tap for 3.5mm Locking Head Screws |
1 |
263.025 |
Bone Tap with T – Handle Dia. 3.5mm Thread Length 50mm, Total Length 125mm |
1 |
804.110 |
LCP Drill Sleeve 3.5mm for Drill Bit 2.8mm |
2 |
260.210 |
Drill Bit – S.S. – Quick Coupling End Dia. 2.0mm X 140mm Long |
2 |
804.122 |
Tap for 2.7mm Locking Head Screws |
1 |
804.120 |
LCP Drill Sleeve 2.7mm for 2.0mm Drill Bit |
2 |
301.031 |
Hexagonal Screw Driver 2.0mm Tip |
1 |
400.095 |
Graphic Combined Implant & Instrument Box For 3.5mm / 4.0mm Locking Small Fragment Set |
1 |