Variolock Locking Variable Angle Volar Plate 2.7mm Head 4 Holes (Head width 19.5mm)

Variolock Locking Variable Angle Volar Plate 2.7mm Head 4 Holes (Head width 19.5mm)

Send Enquiry
Return to Sub Category
Return to Main Category
  • Raw Material: Stainless Steel & Titanium

Indications:

  • Fragment Specific Intra-Articular, Extra-Articular And Complex Fractures Of Distal Radius.
  • Osteotomies Of Distal Radius.

Categories: ,

Description

Following Screws are to be use with above Plates:

A) Variolock 2.7mm Locking Head Screw – Self Tapping

Stainless Steel Hex Drive Titanium
Cat No. Size Cat No.
101.910 To 101.940 10mm To 40mm TI.101.910 To Ti.101.940
Stainless Steel Star Drive Titanium
Cat No. Size Cat No.
100.710 To 100.740 10mm To 40mm Ti.100.710 To Ti.100.740

B) 2.7mm Locking Head Screw – Self Tapping

Stainless Steel Hex Drive Titanium
Cat No. Size Cat No.
101.310 To 101.350 10mm To 50mm TI.101.310 To Ti.101.350
Stainless Steel Star Drive Titanium
Cat No. Size Cat No.
101.410 To 101.450 10mm to 50mm Ti.101.410 To Ti.101.450

C) Cortical Screw 2.7mm Dia. – Self Tapping

Stainless Steel Hex Drive Titanium
Cat No. Size Cat No.
101.106 To 101.140 6mm To 40mm Ti.101.106 To Ti.101.140
Stainless Steel Star Drive Titanium
Cat No. Size Cat No.
101.710 To 101.740 10mm To 40mm TI.101.710 To Ti.101.740

Following Instruments to be use with above Plate:

Cat No. Description
260.210 Drill Bit – S.S. – Quick Coupling End Dia. 2.0mm X 140mm Long
260.215 Drill Bit – S.S.Quick Coupling End Dia. 2.2mm x 150mm Long – Calibrated
264.020 Bone Tap – Quick Coupling End Dia. 2.7mm,  Thread Length 33mm, Total Length 100mm
301.124 Hexagonal Screw Driver with Self Holding Sleeve 2.0mm Tip (for 2.4mm Cortical, Locking & 2.7mm Locking Head Screw) – Silicon Handle
301.031 Hexagonal Screw Driver 2.0mm Tip – Silicon Handle
301.110 Small Hexagonal Screw Driver 2.5mm Tip – Silicon Handle
311.004 Mini Depth Gauge(Measuring length 40mm)
804.120 LCP Drill Sleeve 2.7mm for 2.0mm Drill Bit
804.122 Tap for 2.7mm Locking Head Screws
804.124 Variable Angle Drill Sleeve 2.7mm
804.127 Conical Type Variable Angle Drill Sleeve 2.7mm
804.162 Q.C. Torque Screw Driver Handle 2.0mm Tip (Torque 0.8N.m)
804.166 Hexagonal Screw Driver Q.C. End Shaft, 2.0mm Tip(For Torque Handle 0.8N.M)
XP.301.080 Star Drive Screw Driver 2mm Tip/T-8

Following Size of Variolock Locking Variable Angle Volar Plate 2.7mm Head 4 Holes (Head Width 19.5mm) are available in Stainless Steel & Titanium Material:

Cat. No. (Stainless Steel) Holes (Left) Cat. No. (Titanium)
895.002 2 Ti. 895.002
895.003 3 Ti. 895.003
895.004 4 Ti. 895.004
895.005 5 Ti. 895.005
895.006 6 Ti. 895.006
895.007 7 Ti. 895.007
895.008 8 Ti. 895.008
895.010 10 Ti. 895.010
Cat. No. (Stainless Steel) Holes (Right) Cat. No. (Titanium)
895.102 2 Ti. 895.102
895.103 3 Ti. 895.103
895.104 4 Ti. 895.104
895.105 5 Ti. 895.105
895.106 6 Ti. 895.106
895.107 7 Ti. 895.107
895.108 8 Ti. 895.108
895.110 10 Ti. 895.110

Related products