5.0mm Locking Head Cancellous Screw Full Thread – Self Tapping – Hex Drive
S.NO | CORRESPONDING INSTRUMENTS TO BE USE: | Cat. No. |
---|---|---|
1 | Drill Bit S.S. Quick Coupling end Dia. 4.3mm x 221mm Long Calibrated | 260.430 |
2 | LCP Drill Sleeve 5.0mm For Drill Bit 4.3mm | 803.110 |
3 | Hexagonal Screw Driver with Self Holding Forceps (for 5.0mm Locking Head & 5.0mm Locking Cancellous Screws) | 301.029 |
4 | Q.C. Torque Screw Driver Handle 3.5mm Tip (Torque 4.0Nm) | 804.164 |
5 | Hexagonal Screw Driver Q.C end Shaft – 3.5mm Tip (for Torque Handle 4.0Nm) | 804.170 |
Description
Cat No. | Length | Cat No. |
Stainless Steel | Titanium | |
110.725 | 25 MM | Ti.110.725 |
110.730 | 30 MM | Ti.110.730 |
110.735 | 35 MM | Ti.110.735 |
110.740 | 40 MM | Ti.110.740 |
110.745 | 45 MM | Ti.110.745 |
110.750 | 50 MM | Ti.110.750 |
110.755 | 55 MM | Ti.110.755 |
110.760 | 60 MM | Ti.110.760 |
110.765 | 65 MM | Ti.110.765 |
110.770 | 70 MM | Ti.110.770 |
110.775 | 75 MM | Ti.110.775 |
110.780 | 80 MM | Ti.110.780 |
110.785 | 85 MM | Ti.110.785 |
110.790 | 90 MM | Ti.110.790 |
110.795 | 95 MM | Ti.110.795 |
110.800 | 100 MM | Ti.110.800 |
110.805 | 105 MM | Ti.110.805 |
110.810 | 110 MM | Ti.110.810 |