4.0mm Locking Head Cancellous Screw Full Thread – Self Tapping (Hex Drive)
| S.NO | CORRESPONDING INSTRUMENTS TO BE USE: | Cat. No. |
|---|---|---|
| 1 | Drill Bit S.S. Quick Coupling End Dia. 2.8mm X 180mm Long ? Calibrated | 260.281 |
| 2 | LCP Drill Sleeve 3.5mm for Drill Bit 2.8mm | 804.110 |
| 3 | Hexagonal Screw Driver 2.5mm Tip ? Silicon Handle | 301.040 |
| 4 | Q.C. Torque Screw Driver Handle 2.5mm Tip (Torque 1.5Nm) | 804.163 |
| 5 | Hexagonal Screw Driver Q.C. End Shaft, 2.5mm Tip (for Torque Handle 1.5Nm) | 804.168 |
| 6 | Hexagonal Screw Driver With Self Holding Sleeve 2.5mm Tip (for 2.7mm Cortical, 3.5mm & 4.0mm Locking Head screws) | 301.026 |
| 7 | Small Depth Gauge | 303.010 |
Description
| Cat No. (Stainless Steel) | Length | Cat No. (Titanium) |
| – | ?10 MM | Ti.105.510 |
| 105.512 | ?12 MM | Ti.105.512 |
| 105.514 | ?14 MM | Ti.105.514 |
| 105.516 | ?16 MM | Ti.105.516 |
| 105.518 | ?18 MM | Ti.105.518 |
| 105.520 | ?20 MM | Ti.105.520 |
| 105.522 | ?22 MM | Ti.105.522 |
| 105.524 | ?24 MM | Ti.105.524 |
| 105.526 | ?26 MM | Ti.105.526 |
| 105.528 | ?28 MM | Ti.105.528 |
| 105.530 | ?30 MM | Ti.105.530 |
| 105.532 | ?32 MM | Ti.105.532 |
| 105.534 | ?34 MM | Ti.105.534 |
| 105.536 | ?36 MM | Ti.105.536 |
| 105.538 | ?38 MM | Ti.105.538 |
| 105.540 | ?40 MM | Ti.105.540 |
| 105.542 | ?42 MM | Ti.105.542 |
| 105.544 | ?44 MM | Ti.105.544 |
| 105.546 | ?46 MM | Ti.105.546 |
| 105.548 | ?48 MM | Ti.105.548 |
| 105.550 | ?50 MM | Ti.105.550 |
| 105.555 | ?55 MM | Ti.105.555 |
| 105.560 | ?60 MM | Ti.105.560 |
| 105.565 | ?65 MM | Ti.105.565 |
| 105.570 | ?70 MM | Ti.105.570 |
| 105.575 | ?75 MM | Ti.105.575 |
| 105.580 | ?80 MM | Ti.105.580 |
