Variolock Locking Variable Angle Distal Humerus Medial Plate with Extension 2.7/3.5mm – Titanium
Indications:
- Intra – Articular Fractures of the Distal Humerus.
- Comminuted Supracondylar Fractures of the Distal Humerus.
- Osteotomies of the Distal Humerus.
- Nonunions of the Distal Humerus.
(Two Plate Technique for the Distal Humerus).
Description
Following Screws are to be use with above Plates:
A) Variolock 2.7mm Locking Head Screw – Self Tapping
| Stainless Steel | Hex Drive | Titanium |
|---|---|---|
| Cat No. | Size | Cat No. |
| – | 10mm To 40mm | TI.101.910 To Ti.101.940 |
| Stainless Steel | Star Drive | Titanium |
|---|---|---|
| Cat No. | Size | Cat No. |
| – | 10mm To 40mm | Ti.100.710 To Ti.100.740 |
B) 2.7mm Locking Head Screw – Self Tapping
| Stainless Steel | Hex Drive | Titanium |
|---|---|---|
| Cat No. | Size | Cat No. |
| – | 10mm To 50mm | Ti.101.310 To Ti.101.350 |
| Stainless Steel | Star Drive | Titanium |
|---|---|---|
| Cat No. | Size | Cat No. |
| – | 10mm To 50mm | Ti.101.410 To Ti.101.450 |
C) Cortical Screw 2.7mm Dia. – Self Tapping
| Stainless Steel | Hex Drive | Titanium |
|---|---|---|
| Cat No. | Size | Cat No. |
| – | 6mm To 40mm | Ti.101.106 To Ti.101.140 |
| Stainless Steel | Star Drive | Titanium |
|---|---|---|
| Cat No. | Size | Cat No. |
| – | 10mm To 40mm | TI.101.710 To Ti.101.740 |
D) Variolock 3.5mm Locking Head Screw – Self Tapping
| Stainless Steel | Hex Drive | Titanium |
|---|---|---|
| Cat No. | Size | Cat No. |
| – | 10mm To 80mm | Ti.102.910 To Ti.102.980 |
| Stainless Steel | Star Drive | Titanium |
|---|---|---|
| Cat No. | Size | Cat No. |
| – | 10mm To 80mm | Ti.102.510 To Ti.102.580 |
E) 3.5mm Locking Head Screw – Self Tapping
| Stainless Steel | Hex Drive | Titanium |
|---|---|---|
| Cat No. | Size | Cat No. |
| – | 10mm To 80mm | Ti.102.310 To Ti.102.380 |
| Stainless Steel | Star Drive | Titanium |
|---|---|---|
| Cat No. | Size | Cat No. |
| – | 10mm To 80mm | Ti.102.410 To Ti.102.480 |
F) Cortical Screw 3.5mm Dia. – Self Tapping
| Stainless Steel | Hex Drive | Titanium |
|---|---|---|
| Cat No. | Size | Cat No. |
| – | 10mm To 60mm | Ti.102.210 To Ti.102.260 |
| Stainless Steel | Star Drive | Titanium |
|---|---|---|
| Cat No. | Size | Cat No. |
| – | 10mm To 60mm | Ti.102.710 To Ti.102.760 |
Following Instruments to be use with above Plate:
| Cat No. | Description |
|---|---|
| 260.281 | Drill Bit – S.S. Quick Coupling End Dia. 2.8mm x 180mm Long – Calibrated |
| 804.110 | LCP Drill Sleeve 3.5mm for Drill Bit 2.8mm |
| 804.121 | Tap for 3.5mm Locking Head Screws |
| 804.163 | Q.C. Torque Screw Driver Handle 2.5mm Tip (Torque 1.5Nm) |
| 804.168 | Hexagonal Screw Driver Q.C. End Shaft, 2.5mm Tip(For Torque Handle 1.5N.M) |
| 260.250 | Q.C. Torque Screw Driver Handle 2.5mm Tip (Torque 1.5Nm) |
| 263.025 | Bone Tap with T – Handle Dia. 3.5mm Thread Length 50mm, Total Length 125mm |
| 301.110 | Small Hexagonal Screw Driver 2.5mm Tip – Sillicon Handle |
| 301.125 | Hexagonal Screw Driver with Self Holding Sleeve 2.5mm Tip (for 3.5mm Cortical, & 4.0mm Cancellous Screws) – Silicon Handle |
| 301.126 | Hexagonal Screw Driver with Self Holding Sleeve 2.5mm Tip (for 2.7mm Cortical, 3.5mm & 4.0mm Locking Head Screw) – Silicon Handle |
| 303.010 | Small Depth Gauge (Measurging Upto 80mm) |
| XP.301.081 | Star Drive Screw Driver – 2.5mm Tip/T-15 |
| 804.114 | Variable Angle Drill Guide For 3.5/4.0MM Variable Angle – LCP Plate |
| 260.210 | Drill Bit – S.S. – Quick Coupling End Dia. 2.0mm X 140mm Long |
| 260.215 | Drill Bit – S.S.Quick Coupling End Dia. 2.2mm x 150mm Long – Calibrated |
| 263.020 | Bone Tap with T – Handle Dia. 2.7mm Thread Length 33mm, Total Length 125mm |
| 301.124 | Hexagonal Screw Driver with Self Holding Sleeve 2.0mm Tip (for 2.4mm Cortical, Locking & 2.7mm Locking Head Screw) – Silicon Handle |
| 301.108 | Hexagonal Screw Driver 2.0mm Tip – Sillicon Handle |
| 311.004 | Mini Depth Gauge(Measuring length 40mm) |
| 804.120 | LCP Drill Sleeve 2.7mm for 2.0mm Drill Bit |
| 804.122 | Tap for 2.7mm Locking Head Screws |
| 804.124 | Variable Angle Drill Sleeve 2.7mm |
| 804.127 | Conical Type Variable Angle Drill Sleeve 2.7mm |
| 804.163 | Q.C. Torque Screw Driver Handle 2.5mm Tip (Torque 1.5Nm) |
| 804.166 | Hexagonal Screw Driver Q.C. End Shaft, 2.0mm Tip(For Torque Handle 0.8N.M) |
| XP.301.080 | Star Drive Screw Driver 2mm Tip/T-8 |
Following Size of Variolock Locking Variable Angle Distal Humerus Medial Plate with Extension 2.7/3.5mm is available in Titanium Material:
| Cat No. (Left) | Holes | Cat No. (Right) |
|---|---|---|
| Ti.837.001 | 1 | Ti.837.101 |
| Ti.837.002 | 2 | Ti.837.102 |
| Ti.837.003 | 3 | Ti.837.103 |
| Ti.837.004 | 4 | Ti.837.104 |
| Ti.837.006 | 6 | Ti.837.106 |
| Ti.837.008 | 8 | Ti.837.108 |
