Variolock Locking Variable Angle 3.5mm PHMA Locking Plate (Proximal Humeral Multi Angle) – Short – Titanium

Variolock Locking Variable Angle 3.5mm PHMA Locking Plate (Proximal Humeral Multi Angle) – Short – Titanium

Send Enquiry
Return to Sub Category
Return to Main Category

Indications:

  • Dislocated Fractures of the Proximal Humerus, Including Fractures Involving Osteopenic Bone.
  • Pseudarthrosis in Proximal Humerus.
  • Osteotomies in the Proximal Humerus.
  • Dislocated Fractures of the Proximal Humerus (Fractures Extending to the Shaft).
Categories: ,

Description

Following Screws are to be use with above Plates:

A) Variolock 3.5mm Locking Head Screw – Self Tapping

Stainless Steel Hex Drive Titanium
Cat No. Size Cat No.
– 10mm To 80mm Ti.102.910 To Ti.102.980
Stainless Steel Star Drive Titanium
Cat No. Size Cat No.
– 10mm To 80mm Ti.102.510 To Ti.102.580

B) 3.5mm Locking Head Screw – Self Tapping

Stainless Steel Hex Drive Titanium
Cat No. Size Cat No.
– 10mm To 80mm Ti.102.310 To Ti.102.380
Stainless Steel Star Drive Titanium
Cat No. Size Cat No.
– 10mm To 80mm Ti.102.410 To Ti.102.480

C) Variolock 4.0mm Locking Head Cancellous Screw Full Thread – Self Tapping

Stainless Steel Hex Drive Titanium
Cat No. Size Cat No.
– 12mm To 80mm Ti.105.912 To Ti.105.980
Stainless Steel Star Drive Titanium
Cat No. Size Cat No.
– 12mm To 80mm Ti.105.412 To Ti.105.480

D) 4.0mm Locking Head Cancellous Screw Full Thread – Self Tapping

Stainless Steel Hex Drive Titanium
Cat No. Size Cat No.
– 12mm To 80mm Ti.105.512 To Ti.105.580
Stainless Steel Star Drive Titanium
Cat No. Size Cat No.
– 12mm To 80mm Ti.105.612 To Ti.105.680

E) Cortical Screw 3.5mm Dia. – Self Tapping

Stainless Steel Hex Drive Titanium
Cat No. Size Cat No.
– 10mm To 60mm Ti.102.210 To Ti.102.260
Stainless Steel Star Drive Titanium
Cat No. Size Cat No.
– 10mm To 60mm Ti.102.710 To Ti.102.760

Following Instruments to be use with above Plate:

Cat No. Description
260.281 Drill Bit – S.S. Quick Coupling End Dia. 2.8mm x 180mm Long – Calibrated
804.110 LCP Drill Sleeve 3.5mm for Drill Bit 2.8mm
804.121 Tap for 3.5mm Locking Head Screws
804.163 Q.C. Torque Screw Driver Handle 2.5mm Tip (Torque 1.5Nm)
804.168 Hexagonal Screw Driver Q.C. End Shaft, 2.5mm Tip(For Torque Handle 1.5N.M)
260.250 Q.C. Torque Screw Driver Handle 2.5mm Tip (Torque 1.5Nm)
263.025 Bone Tap with T – Handle Dia. 3.5mm Thread Length 50mm, Total Length 125mm
260.270 Drill Bit – S.S. – Quick Coupling Dia. 2.7mm X 125mm Long
263.037 Bone Tap with T – Handle Dia. 4.0mm – Cancellous,  Thread Length 50mm, Total Length 125mm
301.110 Small Hexagonal Screw Driver 2.5mm Tip – Sillicon Handle
301.125 Hexagonal Screw Driver with Self Holding Sleeve 2.5mm Tip (for 3.5mm Cortical, & 4.0mm Cancellous Screws) – Silicon Handle
301.126 Hexagonal Screw Driver with Self Holding Sleeve 2.5mm Tip (for 2.7mm Cortical, 3.5mm & 4.0mm Locking Head Screw) – Silicon Handle
303.010 Small Depth Gauge
XP.301.081 Star Drive Screw Driver – 2.5mm Tip/T-15
804.114 Variable Angle Drill Guide For 3.5/4.0MM Variable Angle – LCP Plate
804.128 Conical Type Variable Angle Drill Sleeve 3.5/4.0mm

Following Size of Variolock Locking Variable Angle 3.5mm PHMA Locking Plate (Proximal Humeral Multi Angle) – Short is available in Titanium Material:

Cat No. Holes
Ti.846.102 2
Ti.846.103 3
Ti.846.104 4
Ti.846.105 5

Related products