5.0mm Periprosthetic Locking Head Screw
Following Corresponding Instruments to be Use with above Locking Screw:
| Cat. No. | Product Description |
|---|---|
| 260.430 | Drill Bit S.S. Quick Coupling end Dia. 4.3mm x 221mm Long Calibrated |
| 803.110 | LCP Drill Sleeve 5.0mm For Drill Bit 4.3mm |
| 803.112 | Tap for 5.0mm Locking Head Screws |
| 301.029 | Hexagonal Screw Driver with Self Holding Sleeve 3.5mm Tip (for 5.0mm Locking Head & 5.0mm Locking Cancellous Screws) |
| 804.164 | Q.C. Torque Screw Driver Handle 3.5mm Tip (Torque 4.0Nm) |
| 804.170 | Hexagonal Screw Driver Q.C end Shaft – 3.5mm Tip (for Torque Handle 4.0Nm) |
| 301.050 | Large Hexagonal Screw Driver 3.5mm Tip – Silicon Handle |
| 303.020 | Large Depth Gauge |
| 803.114 | Variable Angle Drill Guide for 4.5/ 5.0mm Variable Angle – LCP Plate – (Optional) |
Description
| Cat. No. (Stainless Steel) | Length(mm) | Cat. No. (Titanium) |
|---|---|---|
| 106.812 | 12 | Ti.106.812 |
| 106.814 | 14 | Ti.106.814 |
| 106.816 | 16 | Ti.106.816 |
| 106.818 | 18 | Ti.106.818 |
| 106.820 | 20 | Ti.106.820 |
| 22 | Ti.106.822 | |
| 24 | Ti.106.824 | |
| 26 | Ti.106.826 | |
| 28 | Ti.106.828 | |
| 30 | Ti.106.830 |
